WDW-E Series UTM
WDW-E Series UTM
Electronic universal testing machine adopts dual space door type structure, in general, tension test is executed at the upper space, compression and bending test are applied at the lower space, the test space can be exchanged with customer's preference. The loadframe is consisted of lead-column, ballscrew, upper crosshead, middle crosshead and worktable, and the adjustable speed system is installed underside of the worktable. High accuracy, wide range and stable Japan Panasonic AC servo motor drive the ballscrew pair rotating through syn-deceleration system, the ballscrew pair drive middle crosshead, make the tension clamp(compression, bending) move up and down, then realize load and offload to the specimen. This structure have enough stiffness to apply high efficiency and stable moving. Key parts are processed on the processing center to ensure the accuracy of the load frame. Ballscrew is E5 class.
Machine can be equipped with CONTROL CARD or - Plate of Instrumentation and control located inside of the mechanical structure of the equipment allowing, during the tests, to realize all of the control functions and acquisition of data in an autonomous way, using own electronic resources, that it acting doesn't depend on the acting on the computer connected. The communication between the machine and the computer should be made being used of doors standardized commonly found in available computers in the market (it carries serial, USB, Ethernet, etc.), allowing the use of computers this way in several assembly formats ("desktop", "notebook", "all-in-one", etc.).